ES-1 Slide Copying Adapter for 52mm Thread

2 Reviews

Product 3213

$97.50

Features

Attached to the AF Micro-Nikkor 60mm f/2.8D lens with the BR-5 Ring or the Micro-Nikkor 55mm f/2.8 lens, this adapter enables duplication of 35mm film.
  • Full Details

More Ways To Buy

Ratings & Reviews

Average Customer Rating

5 / 5

Based on 2 Reviews

Own this product already?

Write a Review
  • 5

    Easier/better than a scanner!

    Posted by Carole on March 23, 2019

    First: I use the ES-1 on the Nikon 40mm f/2.8 micro. It attaches directly to the lens as both have 52mm size threads...so no adapter is needed to make it fit. I use a DX camera for this...the D5600 works great and so does the D7500. Other DX cameras with this particular lens will work too. For light I use a 5000K 8.5x11 light panel placed about 6-8 inches behind the slide copier, then I set the camera on a table and use a remote to trigger the shutter. This setup is ridiculously easy, very fast to do each slide, and is a gazillion times better than trying to scan old slides—which was so time-consuming I hated doing it at all and gave up digitizing my hundreds of slides until I discovered the ES-1. If you have a lot of slides to scan, this is a fabulous solution.

    Note: All the descriptions for this ES-1 mention the 60mm micro and an older 55mm micro. These are for FULL FRAME cameras. There is never any mention of the 40mm micro on a DX camera...which is a perfect combination since it is very direct and simple—attach the ES-1 to the 40mm lens (both have 52mm threads), attach the lens to a DX camera, have a light source, best to use a remote trigger, and start copying slides! Quick and easy.

  • 5

    This works perfectly!

    Posted by RoscoeAndRick on August 26, 2014

    I purchased this adapter to copy slides and negatives using a Nikon D800E. I use a Micro Nikkor 60 mm f 2.8 lens and a Nikon BR-5 mount adapter ring. It works perfectly. Some people complain that the copy adapter rotates, I use a thick rubber band to hold it in place. Plus the rubber band allows some easy adjustment if needed. My next step is to design and build a 35mm film adapter I can slide in place and copy film with.